Tripp Lite Tripp Lite 1.4kW Single-Phase ATS / Metered PDU, 120V (8 5-15R), 2 5-15P, 100-127V Input, 2 12ft Cords, 1U Rack-Mount - (PDUMH15AT)

Overview
Tripp Lite 1.4kW Single-Phase ATS / Metered PDU, 120V (8 5-15R), 2 5-15P, 100-127V Input, 2 12ft Cords, 1U Rack-Mount, Metered, 1U, Horizontal, Metal, Black, UL 60950-1, Class A, NOM
1.4kW Single-Phase ATS / Metered PDU, 120V (8 5-15R), 2 5-15P, 100-127V Input, 2 12ft Cords, 1U Rack-Mount
Fast Delivery

Same day shipping on most in stock orders placed before 3PM (EST)

Competitive Prices

Our automated system checks our sources daily to ensure we always have our lowest price.

Warranty

Your purchase is protected by the manufacturers warranty.

Tripp Lite 1.4kW Single-Phase ATS / Metered PDU, 120V (8 5-15R), 2 5-15P, 100-127V Input, 2 12ft Cords, 1U Rack-Mount. PDU types: Metered, Rack mounting: 1U, Mounting: Horizontal. Nominal input voltage: 100-127, Maximum current: 15 A, Nominal output voltage: 100-127. AC outlets quantity: 8 AC outlet(s), Power plug: NEMA 5–15P, AC outlet types: NEMA 5–15R. Cable length: 3.66 m. Dimensions (WxDxH): 444 x 368 x 44.4 mm, Weight: 5 kg
Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.
- 120V 15A Automatic Transfer Switch (ATS) / Metered PDU (Agency de-rated to 12A continuous)
- Provides a redundant A/B power option for non-redundant networking equipment with a single input power cord
- Digital display continuously reports total output power consumption in amps
- 1U horizontal rackmount form factor; 14.5 in. / 36.8 cm depth
- 8 built-in NEMA 5-15R outlets
- Set of two 12 ft. / 3.6m NEMA 5-15P input cables support connection to separate PRIMARY and SECONDARY power sources
- ATS circuits normally maintain output sourced from the primary input cable; As primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable
- ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported by an online UPS with zero transfer time similar to Tripp Lite SmartOnline series)
- Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported
- On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
- Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds
- Built-in card slot supports optional SNMPWEBCARD for permanent upgrade to a switched & monitored PDU system
- Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup
- Front panel LEDs confirm power availability on both input lines
- TAA Compliant Version Available - Order Tripp Lite PDUMH15ATAA
2-year limited warranty
More Information
Addtional Specification

Ports & interfaces

AC outlets quantity 8 AC outlet(s)
Power plug NEMA 5–15P
AC outlet types NEMA 5–15R

Weight & dimensions

Dimensions (WxDxH) 17.48 x 14.49 x 1.75 "
Weight 2.27 lbs

Power

Nominal input voltage 100-127 V
Maximum current 15 A
Input frequency 60 Hz
Nominal output voltage 100-127 V

Operational conditions

Storage temperature (T-T) -15 - 50 °C
Operating altitude 0 - 3000 m

Ergonomics

Cable length 3.66 m

Design

PDU types Metered
Rack mounting 1U
Mounting Horizontal
Material Metal
Colour of product Black
RoHS compliance Y
Certification UL 60950-1, Class A, NOM
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
MSRP $723.69
Special Price $410.35 was $441.19
-
+
Tripp Lite 1.4kW Single-Phase ATS / Metered PDU, 120V (8 5-15R), 2 5-15P, 100-127V Input, 2 12ft Cords, 1U Rack-Mount