You have no items in your shopping cart.
Product Description
Details
Supermicro SBE-710Q-R75. Form factor: 19", Colour of product: Black, Cooling type: Active. Power supply: 2500 W. Width: 469.9 mm, Depth: 736.6 mm, Height: 307.3 mm
Space Optimization
Housed within a 19" industry-standard rack, SuperBlade servers reduce server footprint in the data center. Power, cooling and networking devices are aggregated in the rear of the chassis which optimizes the required amount of space.
Up to 10 TwinBlade (20 nodes) can be installed in a 7U chassis. Compared to the 20U of rack space that twenty 1U servers would normally require as individual servers, the SuperBlade provides more than 50% density savings with 120 nodes and 24 switches in a 42U rack..
Cable Reduction
The SuperBlade server chassis enclosure greatly simplifies the cabling process by aggregating cabling of ten servers at once. Up to 90% of network, power, and KVM cabling required for ten 1U servers are reduced by moving to blade servers in a single chassis. These cabling reductions continue across networking, SAN connectivity, and management controllers.
Reducing the number of cables speeds up the deployment of servers and helps reduce troubleshooting issues by presenting fewer physical connections to the servers.
- Up to 10 hot-plug Twin processor blades.
- Supports Intel based Twinblade.
- Supports Intel and AMD based 10-blade.
- Power LED, Fault LED.
- Supports up to two hot-plug 1/10 Gigabit Ethernet Layer 2/3 switches/ Gigabit Ethernet Pass-Through Modules.
- Supports one hot-plug management modules providing remote KVM and IPMI 2.0 functionalities.
- Up to four hot-swap 2500W power supplies, N+1 redundant.
- Up to 16 cooling fans.
- Dimensions (HxWxD): 12.1" x 18.5" x 29".
Space Optimization
Housed within a 19" industry-standard rack, SuperBlade servers reduce server footprint in the data center. Power, cooling and networking devices are aggregated in the rear of the chassis which optimizes the required amount of space.
Up to 10 TwinBlade (20 nodes) can be installed in a 7U chassis. Compared to the 20U of rack space that twenty 1U servers would normally require as individual servers, the SuperBlade provides more than 50% density savings with 120 nodes and 24 switches in a 42U rack..
Cable Reduction
The SuperBlade server chassis enclosure greatly simplifies the cabling process by aggregating cabling of ten servers at once. Up to 90% of network, power, and KVM cabling required for ten 1U servers are reduced by moving to blade servers in a single chassis. These cabling reductions continue across networking, SAN connectivity, and management controllers.
Reducing the number of cables speeds up the deployment of servers and helps reduce troubleshooting issues by presenting fewer physical connections to the servers.
- Up to 10 hot-plug Twin processor blades.
- Supports Intel based Twinblade.
- Supports Intel and AMD based 10-blade.
- Power LED, Fault LED.
- Supports up to two hot-plug 1/10 Gigabit Ethernet Layer 2/3 switches/ Gigabit Ethernet Pass-Through Modules.
- Supports one hot-plug management modules providing remote KVM and IPMI 2.0 functionalities.
- Up to four hot-swap 2500W power supplies, N+1 redundant.
- Up to 16 cooling fans.
- Dimensions (HxWxD): 12.1" x 18.5" x 29".
Technical Information
Technical Information
|
Warranty
All products are protected by the Manufacturer’s warranty, unless otherwise specified. NCDS Canada guarantees that the products shipped to you are free of any defects; should your product be deemed defective we will happily exchange the item. If the item is no longer available, we will issue you a refund. Refurbished Products have a 30 day limited warranty, unless otherwise specified. For more information about product warranties, please see our Warranty Policy.
